Our inventory of specialist plant and equipment provides a workable solution to every machinery moving scenario.  All equipment is subject to stringent maintenance and testing procedures.

  •     Heavy duty lift trucks
  •     Versa-Lifts (lift capacity up to 40 Te)
  •     Hydraulic lifting gantries (Super Lift)
  •     Lorry mounted cranes
  •     Mobile elevating work platforms
  •     Lifting beams and frames
  •     Rigging accessories

Versa-Lifts

Versa-Lift lifting equipment currently dominates the Machinery Moving and Installation market. The trucks operate on a moving counterweight principle allowing the truck to be up to fifty percent smaller than trucks using conventional static counterweight technology. When lifting a load, the counterweight will extend either automatically or manually to provide the desired amount of counterweight in order for the truck to remain stable. This enables the truck to lift extremely heavy items either with the standard forks or by the use of a specially designed jib attachment while remaining compact therefore aiding transport and manoeuvrability. It also allows the truck to access areas that would not be accessible by conventional lifting equipment such as mobile or lorry mounted cranes.

Machinery Moving Versalifts

Lorry Mounted Cranes

A crane mounted on a truck carrier provides the mobility for this type of crane. When working on site, outriggers are extended horizontally from the chassis then vertically to level and stabilise the crane while stationary and hoisting. Many lorry mounted cranes have slow-travelling capability (a few miles per hour) while suspending a load. Great care must be taken not to swing the load sideways from the direction of travel, as most anti-tipping stability then lies in the stiffness of the chassis suspension. Most cranes of this type also have moving counterweights for stabilisation beyond that provided by the outriggers. Loads suspended directly aft are the most stable, since most of the weight of the crane acts as a counterweight. Factory-calculated charts (or electronic safeguards) are used by crane operators to determine the maximum safe loads for stationary (outriggered) work as well as (on-rubber) loads and travelling speeds.

Machinery Moving Specialists

Super Lift Gantry System (SL125)

When it comes to moving awkward or heavy plant, the Enerpac Super Lift gantry system is an alternative solution to traditional machinery moving methods. The Super Lift is effective when working in confined spaces or if there are restricted floor loadings. When access is difficult, the Super Lift has the versatility to set up over, under, around or adjacent to the load. They provide innovative solutions for a cost effective movement and lifting of plant equipment. Specialist hydraulic gantry systems allow safe load raising, lowering, turning, tilting and traversing without dismantling roofs or steelwork.

gantry3

Request a Quote

Please leave a few details and a member of our team will be in touch to discuss your requirements in more detail.

Please upload any relevant images or files that will help us with your enquiry

Captcha (Please enter the characters as you see them)captcha

Enquiry

Please leave a few details and a member of our team will be in touch to discuss your requirements in more detail.

Please upload any relevant images or files that will help us with your enquiry

Captcha (Please enter the characters as you see them)captcha

Request Callback

Please leave your name and number and we will contact you shortly.

Captcha (Please enter the characters as you see them)captcha

Request a Brochure

Please select your brochure

Captcha (Please enter the characters as you see them)captcha